特性

1.   100 mV/lbf sensitivity

2.   50 lbf compression range

3.   50 lbf tension range

4.   100 lbf maximum compression

5.   75 lbf maximum tension

6.   5-foot integral cable

7.   10-32 tapped holes top and bottom

8.   4.5 grams

9.   Titanium

10.  Miniature

11.  IEPE

應用

1.   Modal and structural analysis

2.   Process control

3.   General purpose dynamic force measurements where mass loading is a concern or where vertical space requirements may be limited

Design of the model 1022V features a quartz sensing element, operating in compression mode and packaged in a lightweight titanium housing with an integral 5-foot coaxial cable terminating to a 10-32 coaxial connector. A series of 10-32 tapped holes, located at both the top and bottom of the sensor housing, are designed to facilitate mounting of the sensor in threaded holes on the driving rods and test specimen.

Weight (less cable) 0.16 oz 4.50 grams Supplied Accessories:

Size Height X Diameter 0.49 x 0.40 Inches 12.44 x 10.16 mm

Material Ti 6AI-4V Ti 6AI-4V 3) 6742 Removal tool

Housing Material Ti 6AI-4V Ti 6AI-4V N

Sensing Element Material Quartz Quartz

Mode Compression Compression

Sensitivity, ± 10 % 100 mV/LbF 22.5 mV/N

Range, Full Scale ± 50 LbF ± 222 N

Stiffness 26 Lb/μin 2039 kN/μm

Linearity [3] ± 1 % Full Scale ± 1 % Full Scale

Max Shock, Unloaded 5000 g's 5000 g's

Max Vibration, Unloaded ± 2500 g's ± 2500 g's

Mounted Resonant Frequency, Unloaded 50 kHz 50 kHz

Noise Resolution 0.0004 LbF rms 0.0018 N rms

Strain Sensitivity @250/µσ 0.006 LbF/µε 0.027 N/µε

Supply Current Range [4] 2 to 20 mA 2 to 20 mA

Compliance Voltage Range 18 to 30 Volts 18 to 30 Volts

Output Impedence,Typ 150 ? 150 ?

Bias Voltage +7.5 to +9.5 VDC +7.5 to +9.5 VDC

Discharge Time Constant >100 Sec >100 Sec

F.S.Output Voltage,Nom 5 Volts, peak 5 Volts, peak

Output Signal Polarity Compression Positive Positive

Tension Negative Negative

Operating Temperature -100 to +250 °F -73 to +121 °C

Environmental Seal Welded/Epoxy Welded/Epoxy

配件

Supplied Accessories: (2) model 6200 mounting studs (10-32 to 10-32), (1) model 6742 thermal boot

Recommended Accessories: model 4110C current source power unit

Compatible Cables: 6011A

訂貨型號

1022V

相關型號

1050C

1051V6

1053V

1061V

1210V1