TheDT-5TXRpanelmeterwithoptionaloutputModulesisaneconomicalunitforspeedandprocesstimemonitoringwhencombinedwithacompatiblein-linesensor

Name: DT-5TXR轉速表
Availability: InStock

產品型號：

更新時間：2024-06-26

廠商性質：代理商

訪問量：498

產品咨詢 13352927502

詳細介紹在線留言

The DT-5TXR panel meter with optional output Modules is an economical unit for speed and process time monitoring when combined with a compatible in-line sensor. Loaded with features found in more expensive units, the DT-5TXR Panel Meter is extremely versatile with selectable inputs. The DT-5TXR is fully scalable and possesses three selectable modes allowing it to measure RPM/linear speed/rate, elapsed time and process time. Each panel meter accepts a variety of signal inputs from any sensor providing an NPN, contact, sine wave, or square wave such as pulse generators, proximity sensors, photoelectric sensors, magnetic sensors and NPN OC transistors. Typical applications can range from machining operation timing, rate of change monitoring such as on a conveyor, elapsed time of oven curing etc. with any variety of compatible sensor inputs desired.

The Shimpo DT-5TXR panel meter also accepts various output modules, enabling it to output data for analysis, record keeping or assist in controlling the process through a separate control device. Up to two modules can be accepted simultaneously, offering an enormous number of combinations and options.

Accepts up to two output modules allowing voltage, current, BCD, NPN & relay output combinations for control or remote process monitoring
Highly accurate (± 0.008% ± 1 digit) makes ideal for process control and analysis
Large 6 digit LED display plus two smaller 6 digit secondary displays allow easy viewing from greater distances
Scalable programming gives user the flexibility to set up and monitor virtually any process
Selectable update time allows operator to speed up/slow down display changes to facilitate process
Wide power range (85 – 264VAC, 50/60Hz) eliminates need for having to purchase and wire an additional power transformer. Low voltage models available
Great versatility with multiple sensor input capability in one unit: NPN open collector, contact and square or sine wave sensor inputs
Front cover protection eliminates accidental bumping of keypad to incorrect program
IP66 front cover protection keeps water out, enables usage in compatible plant wash-down operations
DC power source output to power compatible sensors saves money by eliminating need for separate power supply
Selectable decimal point enables higher resolution display potential 1/8 DIN size panel cut out permits easy, industry-standard mounting

Model	DT-5TXR
Measuring Range	10 – 99,999 rpm (at 1 p/r)
Measuring Range	0.2 – 30,000 rpm (at 60 p/r)
Display Range	Tachometer/Rate Meter: 0 – 999999 with selectable decimal point
	Elapsed Time: 0:00:00 – 9:59:59 or 0.00- 999.99 sec.
	Process Time: 0:00:00 – 0:59:59 or 0.00 – 999.99 sec.
Scalable	Yes (with outputs, see modules)
Accuracy	Tachometer/Rate Meter & Elapsed Time: ± 0.008 % ± 1 digit
Accuracy	Process Time: ± 0.008 % ± 1 digit
Display Update Time	0.2, 0.5, 1, 2, 5, 10, 15, 30, 60 sec.
Input No. of P/R	1 to 9,999 (programmable)
Input Signal Characteristics	NPN open collector input: max. frequency 100 kHz / Contact input: max. frequency 20 Hz / Square wave input: max. frequency 30 kHz – Sine wave input (magnetic pickup): max. frequency 10 kHz
Sensor Power Supply	12 VDC (150 mA)
Power Requirement	85 – 264 VAC (50/60 Hz) Optional (9 – 35 VDC at 1 W also available)
Ambient Temperature	32° – 113° F (0 – 45° C)
Dimensions	5.27" x 3.78" x 1.89" (134 x 96 x 48 mm)
Product Weight	0.66 lb (300 g)
Package Weight	0.95 lb (430 g)
Warranty	2-Year
Included Accessories	Mounting adapters & screws, decal sheet

訂貨型號

DT-5TXR	Panel Meter with Output Module Capability, Selectable inputs, 100-240 VAC Power
DT-5TXR-DC	Panel Meter with Output Module Capability, Selectable inputs, 9-35 VDC Power
DOP-BCDR	BCD output module, 36 Pin Connection
DOP-CPTR	Relay output module, terminal block connection
DOP-FVCR	Analog output module (4-20mA & 0-1, 0-10, 1-5 VDC), 36-pin connection
DOP-FVTR	Analog output module (4-20mA & 0-1, 0-10, 1-5 VDC), terminal block connection
DOP-RMTR	Ratio input module, terminal block connection
DOP-TRTR	NPN open collector output module, terminal block connection

配件

Proximity Sensors	BI2-S12	NPN (NO) sinking output 1.5 kHz frequency, LED indication, 6.5′ (2 m) cable, 0.08″ (2 mm) sensing distance, NEMA 6 (IP67) rating
	DJ2-G	NAMUR output, 3 kHz frequency, zero-sensing capability, 6.5′ (2 m) cable, 0.08″ (2mm) sensing distance, NEMA 6 (IP67) rating
	MCS-3109	NPN (NO,NC) output, 300 Hz frequency, 0.32″ (8 mm) sensing distance, 6.5′ (2 m) cable, NEMA 6 (IP67) rating, for use in high vibration areas
	SE-G	Square wave output, 8 kHz frequency, LED indication, 18″ (0.46 m) cable, 0.04″ (1 mm) sensing distance
Retro-Reflective Photo Sensors	MCS-625	Photo sensor with NPN sinking output, 250 Hz activating frequency, 10′ (3 m) cable 1″ to 3′ (25 to 914 mm) operating range
	MCS-655	Photo sensor with NPN sinking output, 333 Hz activating frequency, LED status, 10′ (3 m) cable, NEMA 4 (IP65), 1″ to 3′ (25 to 914 mm) operating range for light or dark activation.
	LS-S50MLR	Laser sensor with NPN/PNP (NO,NC) outputs, 1.5 kHz frequency, LED indication, 6′ (1.8 m) with quick disconnect connection, NEMA 6 (IP67) rating
Rotary Pulse Generators	RE1B-60F	Rotary encoder in ABS housing with 60 ppr digital output, maximum speed 5000 rpm, 1.7 ft (0.5 m) cable
	RE1B-600F	Rotary encoder in ABS housing with 600 ppr digital output, maximum speed 5000 rpm, 1.7 ft (0.5 m) cable
	RE1B-1000F	Rotary encoder in ABS housing with 1000 ppr digital output, maximum speed 5000 rpm, 1.7 ft (0.5 m) cable
	RE2B-30F	Quadrature rotary encoder in ABS housing with Dual (90° out of phase) 30 ppr digital output, maximum speed: 5000 rpm, 1.7 ft (0.5 m) cable
	RE2B-600F	Quadrature rotary encoder in ABS housing with Dual (90° out of phase) 600 ppr digital output, maximum speed: 5000 rpm, 1.7 ft (0.5 m) cable
	FPM-RE1B	12″ circumference wheel for use with RE1B and RE2B pulse generators
Magentic Pick-up Sensors	MP-10	Sine wave output from change in magnetic to non-magnetic, change in voltage proportional to magnetic flux intensity over time, range of 0.01″ (0.25 mm) typical clearance, 10′ (3 m) cable
	3030AN	Sine wave output from change in magnetic to non-magnetic, change in voltage proportional to magnetic flux intensity over time, range of 0.01″ (0.25 mm) typical clearance, Amphenol connector
	CABLE-3030	Optional cable for 3030AN
	3070-XP12010	Sine wave output from change in magnetic to non-magnetic, change in voltage proportional to magnetic flux intensity over time, range of 0.01″ (0.25 mm) typical clearance, 10′ (3 m) cable Stainless steel housing, explosion-proof ATEX approved: II 2 GEExm II T3
Slot Type Sensor	CM-SR21	For less dense materials that allows beam to penetrate through, NPN or PNP output with a 0.08″ (2 mm) gap range, NEMA 4x (IP65) housing.
Slot Type Sensor	CBL-75ANL	Optional cable for CM-SR21 16.4′ (5 m)